16-1600mm High speed HDPE pipe Extrusion line
Introduction
HDPE pipe Extruder machine as one main products of YILI Machinery is used to produce HDPE pipe, which is called high-density polyethylene pipe. It is a new type of building material with wide application in domestic municipal pipelines. HDPE pipe is mainly used in the following fields, such as Urban and rural water supply pipeline systems, Used as gas pipeline, Used as replacement for cement pipe, cast iron pipe and steel pipe, Used as the industrial raw material pipeline, Landscaping water supply pipe network, Pipes for sewage discharge, Mineral sand and mud transportation, Used as agricultural watering pipeline, Used as marine pipeline, Used as pipeline for seawater desalination.
Technical Specification
| 33D Series Classical Production Line: | ||||
| Model | OD (mm) | Extruder | Max. Output (kg/hr) | Max.Haul-off speed (m/min) |
| PEG63 | Φ20-63 | SJ65/33 | 220 | 15 |
| PEG110 | Φ20-110 | SJ65/33 | 220 | 15 |
| PEG160 | Φ50-160 | SJ75/33 | 400 | 12 |
| PEG250 | Φ75-250 | SJ75/33 | 400 | 10 |
| PEG315 | Φ90-315 | SJ90/33 | 500 | 8 |
| PEG450 | Φ110-450 | SJ90/33 | 500 | 5 |
| PEG630 | Φ280-630 | SJ120/33 | 850 | 3.3 |
| PEG800 | Φ400-800 | SJ120/33 | 1000 | 1.8 |
| PEG1200 | Φ800-1200 | SJ150/33 | 1300 | 0.8 |
| 38D Series High Efficient Production Line: | ||||
| Model | OD (mm) | Extruder | Max. Output (kg/hr) | Max.Haul-off speed (m/min) |
| HPEG63 | Φ20-63 | HSJ60/38 | 320 | 30 |
| HPEG110 | Φ20-110 | HSJ60/38 | 380 | 25 |
| HPEG160 | Φ50-160 | HSJ60/38 | 460 | 15 |
| HPEG250 | Φ75-250 | HSJ75/38 | 600 | 12 |
| HPEG315 | Φ90-315 | HSJ75/38 | 650 | 10 |
| HPEG450 | Φ110-450 | HSJ90/38 | 800 | 8 |
| HPEG630 | Φ280-630 | HSJ90/38 | 950 | 5 |
| HPEG800 | Φ400-800 | HSJ120/38 | 1300 | 2.5 |
| HPEG1200 | Φ800-1200 | HSJ75/38 HSJ90/38 |
1400 | 1.2 |
| HPEG1600 | Φ1000-1600 | HSJ90/38 HSJ90/38 |
1600 | 0.7 |
Tech Features & Advantages
Technology Process
- High performance Extruder, which is the key important part in the whole production line, it ensure high capacity, high efficiency and excellent plasticization
- Mould
Material: 40Cr
Design: Spiral or Basket
Single layer or Multi-layer design
- Vacuum tank
Material: SUS304, 5mm-7mm
Automatic water temperature and level control technology
Accurate calibration
- Cooling tank
Material: SUS304, 3mm-5mm
Fast cooling
- Haul-off
Drive: by frequency inverter to servo motor driving
High quality rubber belts or blocks
With encoder for pipe metering
- No-dust cutter
Design: Universal or Cast Aluminum fixture unit
No-dust smooth cutting
Servo motor synchronization control
- Stacker
Pneumatic discharging
Automatic pipe arranging
